全球最先进的测油仪，北京中西集团独家代理，有现货！
推荐应用领域
环 境 : 监测水的质量和危险的垃圾点 
工 业 : 检查废水的流入和排入 
海 运 : 监测船只的弃物 
石油处理 : 监测油/水分离过程的效率 
机油沉积 : 监测在清洗储油罐时的排弃物 
汽 车 : 监测维修站的废水排出 
质量保证 : 测量纺织品和金属品上残留的机油 
H3-OCMA-350具有保证测量精度的多种特色
稳定的读数:
测油仪的数据评价功能可分析数据,检查数据是否稳定,并显示稳定的读数.
自监测
LCD屏幕上显示的信息可使您随时知道任何电路的故障,测量的不稳定和部件的毛病,因此使您能保证测油仪正确的工作. 
简便的数据保存
H3-OCMA-350保存测量时间和测量日期并且记录下每个数据设置.在打印时,它同时提供 给您时间记录和测量数据,很便于数据保存
H3的S-316溶剂
H3-OCMA-350使用高效、安全的S-316萃取溶剂从含油的水试样、土壤度样或产品表面萃取油成分，得到的萃取液用IR吸收技术（非分散红外技术）分析，这种技术专门适用于油等碳氢化合物。
H3-OCMA-350是在3.4微米到3.5微米范围内测量吸收度值。下方的两个图形描述了（1）石油和（2）H3-S-316溶剂的吸收光谱。包括油的包有碳氢化合物，都吸收3.4微米到3.5微米的红外光谱，因此，测油仪可以快速、准确地测量出萃取液中含有的任何碳氢化物 ，测量数据不会因溶剂的存在而产生误差。
利用SR-300溶剂回收器，H3的S-316溶剂可以循环使用。溶剂的循环使用。溶剂的循环使用不仅降低了溶剂费用，而且有助于保护环境。
技术指标：
应用：淡水、咸水的油污染；土壤分析
原理：溶剂萃取， NPIR分析（红外光谱分析法）
检测器：热电传感器
试样池：20毫米长的石英试样池
测量范围和单位：0-200mg/l,0-1000mg/kg,0-1Abs
分辨率：
mg/l: 0-99.9mg/l;0.1mg/l 100-200mg/l;1mg/l
mg/kg: 0-9.99mg/kg;0.01mg/kg 10.0-99.9mg/kg;0.1 mg/kg 100-1000mg/kg;1mg/kg
Abs: 0-1Abs;0.001Abs
重复性：
mg/l: 0-9.9mg/l;+0.4mg/l +1数字
10.0-99.9mg/l;+2.0mg/l +1数字
100-200mg/l;+4mg/l +1数字
Abs: 全量程+1%
测量：手动控制
校准：在将校准液注入测油仪后，仪器可进行自动校准
萃取溶剂：H3 S-316溶剂
试样池容积：大致6.5毫升
显示：测量数值；有背景光的3 1/2位LCD状态信息，有背景光的LCD字节（16×2个字节）
功能：自诊断，自动保持功能，日历表
输出：RS-232C和中心打印机端口
环境温度：0-40℃
电源要求：100-240VAC +10%，50/60Hz,60VA
外部尺寸：200（H）×250（W）×285（D）毫米 7.9(H)×9.8(W)×11.0(D)英寸
重量：大致5公斤 
SR-300型溶剂回收器（备选）
高效的SR-300型溶剂回收器可以使您每次测量的溶剂费用减少90%，这一备选设备是专门为H3的S-316溶剂设计的，它有一个装有活性碳和活性铝的双柱，具有很强的过滤能力，操作简便，并不需要电源。
回收器尺寸：200（W）×200（D）×600（H）毫米 7.9(W)×7.9(D)×23.6(H)英寸 
Pushbutton simplicity, perfect for field analysis. 
Compact and simple, HORIBA’s OCMA-350 oil content analyzer delivers quick, accurate measurements in the lab or in the field. It efficiently measures the level of oil in water or soil for environmental applications, checks for residual oil on semiconductor parts which have been cleaned, and measures oil on ayn industrial surface.
Using the OCMA-350 is almost effortless. Simply inject the extract from your sample, dissolved in Horiba’s S-316 solvent, into the measuring cell, and press one button. You can even use your PC to simplify operation.


Recommended Applications 
Environment: Surveying water quality and hazardous waste sites 
Industry: Monitoring wastewater influent and effluent 
Marine transportation : Checking bilge and ballast discharge
Petroleum processing : Monitoring the efficiency of oil/water separation processes
Oil depots :Monitoring the discharge produced when cleaning storage tanks
Automotive: Monitoring waste-water discharge from service stations
Quality Assurance: Measuring residual oil on textiles and metal parts.

The OCMA-350 has various special features to assure accurate measurements. 
Stable readout
The unit’s data evaluation function analyzes the readings, determines when the value has stabilized, and displays than stable value.

Self-monitoring 
Messages on the LCD screen inform you of any electrical malfunctions, irregularities in measurement, and deterioration of parts, so that you can always be assured of proper functioning.

Simplified recordkeeping
The OCMA-350 keeps a record of the time and date of measurement along with each data set it records. When printing out, it provides you with both the time and the measurement, allowing for easy recordkeeping.

Measurement of residual oil 
The OCMA-350 makes it easy to measure residual oil on precleaned parts. 
Choose a reasonably sized sample 
Measure out an appropriate amount of solvent, and immerse the part in the solvent until all the residual oil has dissolved. 
Introduce the resulting solution to the measuring cell, and set the cell in place. 
Press the start button and wait for the results. 

HORIBA’s S-316 Solvent 
The OCMA-350 uses the highly effective, environmentally-safe S-316 extraction solvent to extract the oil components from oily water samples, soil samples or product surface. The extract is analyzed using IR absorbance, a non-dispersive infrared spec-trophotometric technique which is specific to hydrocarbons such as oil.

The OCMA-350 measures absorption in the 3.4 to 3.5 micrometer range. The two graphs at the right show the absorption spectra of (1) petroleum and (2) HORIBA’s S-316 solvent. All hydrocarbons, including oils, absorb infrared radiation at about 3.4 to 3.5 micrometers .The S-316 solvent absorbs no infrared radiation in that range. As a result, the unit can measure any hydrocarbons in the extraction solvent quickly and accurately, with no distortion of values due to the presence of the solvent.

HORIBA’s S-316 Solvent can be recycled with the aid of t he optional SR-300 Solvent can be recycled with the aid of the optional SR-300 Solvent Reclaimer. Recycling the solvent not only cuts your solvent costs, but also helps protect the environment.

Specifications 
Application: Oil contamination of fresh and salt water; soil analysis
Principle: Solvent extraction, NDIR analysis(infrared spectroscopy)
Detector: Pyroelectric sensor 
Cell: Quartz cell, cell length 20 mm
Measuring range and unit: 0 to 200mg/l, 0 to 1000 mg/kg, 0 to 1 Abs.
Resolution:
mg/l; 0 to 99.9mg/l; 0.1mg/l
    100 to 200mg/l; 1mg/l
mg/kg; 0 to 99.9 mg/l; 0.1 mg/l
       10.0 to 99.9 mg/kg; 0.1mg/kg
       100 to 1000 mg/kg; 1 mg/kg
Abs; 0 to Abs; 0.001 Abs
Repeatability:
mg/l; 0 to 9.9mg/l; ±0.4mg/l ±1 digit
    10.0 to 99.9 mg/l; ±2.0mg/l ±1 digit
    100 to 200 mg/l ±4mg/l ±1 digit
Abs; ±1F.S.
Measurement: Manually controlled
Calibration: Automatic calibration after the calibration standard is introduced to the instrument
Extraction solvent: HORIBA S-316 solvent 
Sample/solvent volume: Approx. 6.5 ml, ratio of sample to solvent is 1:1
Display: Measured value; 3 1/2 digits LCD with back-light 
        Message; Character display LCD with back-light(16×2 characters)
Functions: Self diagnostics, Auto hold function, Calendar clock
Output: RS-232C and centronics printer port 
Ambient temperature: 0 to 40℃
Power requirement: 100 to 240 VAC±10%, 50/60 Hz, 60VA
Dimensions: 200(H) ×250(W) ×285(D)mm
                    7.9(H) ×9.8(W) ×11.0(D)mm
Weight: Approx. 5kg/11ib 
Model SR-300 Solvent Reclaimer(optional) 
Highly efficient, the SR-300 solvent reclaimer can reduce your per test solvent cost by up to 90%. This optional unit, designed especially for reclaiming HORIBA’s S-316 solvent, features a double column of activated carbon and activated aluminum. It has a large filtering capacity, is easy to operate, and requires no electricity. 
External dimensions: 
200(W) ×200(D) ×600(H)mm                        
(W) ×7.9(D) ×23.6(H)in